Beam support hardware - List of Manufacturers, Suppliers, Companies and Products | IPROS

Beam support hardware Product List

1～7 item / All 7 items

Displayed results
Beam support hardware MH

Beam support hardware MH

It serves the role of six types of beam support hardware and is compatible with beam heights from 105mm to 450mm!

The "Beam Support Hardware MH" can be used by combining three types of beam support hardware, fulfilling the roles of six different beam support hardware types, and accommodating beam heights from 105mm to 450mm. The material is JIS G 3302 structural SGH400, with surface treatment of hot-dip galvanizing (Z27) and cationic electrodeposition coating. Additionally, we offer the "Beam Support Hardware MH (Joint Specification)" which is used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. 【Features】 ■ Beam Support Hardware MH - By combining three types of beam support hardware, it fulfills the roles of six different beam support hardware types. - Accommodates beam heights from 105mm to 450mm. ■ Beam Support Hardware MH (Joint Specification) - Used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Beam support hardware NB

Beam support hardware NB

Climbing beam brackets compatible with beams of 150mm to 360mm and roof slopes of 3.1 inches to 10 inches.

The "Beam Support Hardware NB" accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches. *For roof slopes up to 3 inches, use the beam support hardware MH. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. We offer "NB-90," as well as "NB-90G," "NB-120," and "NB-120G." 【Features】 ■ Accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Main house / Beam support hardware for large beams MH

Main house / Beam support hardware for large beams MH

Main house and large beams! Surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating.

The "Main Beam and Joist Connector MH" is used for the connection of 90mm square main beams and joists. *When using it for joists, if the joist level is -1mm to -48mm, please use the Japanese-style joist connector MO. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Used for the connection of 90mm square main beams and joists ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TN-multi <Fully Processed Less>

TN-multi <Fully Processed Less>

This product eliminates the need for on-site wood processing and allows for a reduction in the labor required for notching and drilling tasks!

"TN-multi" is a product used for supporting beams in renovations and similar applications. This product is completely unprocessed, eliminating the need for on-site wood processing and allowing for a reduction in the labor required for notching and drilling tasks. Additionally, it features temporary nail holes to prevent the hardware from moving during screw fastening or to allow for positioning. This improves the accuracy of the installation. 【Features】 ■ Completely unprocessed ■ No on-site wood processing required, allowing for a reduction in labor for notching and drilling tasks ■ Can be installed even with round-headed bolts ■ Includes temporary nail holes *For more details, please download the PDF or feel free to contact us.

  • Structural Materials
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Beam support hardware "BHV3-208・210"

Beam support hardware "BHV3-208・210"

Equivalent to endurance BH3-210 or higher! Reduces labor during construction without shoulder straps and makes horizontal driving easy!

"BHV3-208・210" is a product used for supporting beams (3-208・3-210) with hardware. The connection to the beam is ZN65, making it easy to drive horizontally when the beam pitch is narrow. It does not have a shoulder, allowing for labor-saving in construction. Furthermore, strength tests have been conducted by House Plus Inspection Co., Ltd., confirming a load capacity equivalent to or greater than C-mark BH3-210. 【Features】 ■ No shoulder, enabling labor-saving in construction ■ Easy horizontal driving when the beam pitch is narrow ■ Load capacity equivalent to or greater than C-mark BH3-210 *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TN-multi <Supporting the reliable addition of beams>

TN-multi <Supporting the reliable addition of beams>

Support for structural reinforcement in sites with limited construction space by facilitating smooth connections in wooden renovations and ensuring reliable beam additions.

"TN-multi" is a product used for supporting beams in renovations and similar applications. It is suitable for structural reinforcement in sites with limited construction space, facilitating smooth connections in wooden renovations and supporting reliable beam additions. Additionally, it features temporary nail holes to prevent the hardware from moving during screw fastening or to allow for positioning. This improves the accuracy of the installation. [Features] - Facilitates smooth connections in wooden renovations and supports reliable beam additions - Can be installed even with round-headed bolts - Includes temporary nail holes *For more details, please download the PDF or feel free to contact us.

  • Structural Materials
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TN-multi <Flexibly respond to site conditions>

TN-multi <Flexibly respond to site conditions>

Can be installed while avoiding existing hardware! Flexibly responds to the complex site conditions unique to renovations.

"TN-multi" is a product used for supporting beams in renovations and similar applications. It can be installed while avoiding existing hardware, allowing for flexible adaptation to the complex site conditions unique to renovations. Additionally, due to the screw arrangement that does not interfere with the washer (Φ45) of the M12 bolt, it can also be installed on the washer side. 【Features】 ■ Can be installed while avoiding existing hardware ■ Flexibly adapts to the complex site conditions unique to renovations ■ Can be installed even with round-headed bolts present ■ Comes with nail holes for temporary fixing *For more details, please download the PDF or feel free to contact us.

  • Structural Materials
  • Beam support hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Beam support hardware

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.